Manual Operating Mechanism CS-11
- Model
- CS-11
- Standard
- —
- Category
- Operating Mechanism
- Documents & pricing
- Type test reports, factory inspection records and quotations are available on request; tender documents are archived by project.
Product Overview
The manual operating mechanism CS-11 is used for manual operation of OCS disconnectors; the model CS-11 is an industry-standard specification.
Applied Standards
The mechanical drive portion complies with GB/T 32580.2-2026, Clause 6.32; general requirements refer to TB/T 2073-2020.
Technical Parameters
| Parameter | Technical Requirement |
|---|---|
| Product model | CS-11 |
| Applicable object | OCS disconnector |
| Operation mode | Manual |
| Construction | Manual operating mechanism, connected to the main shaft of the disconnector |
| Open/close indication | Clear indication when fully opened or fully closed |
| Ambient temperature | -40℃ ~ +40℃ |
| Drive connection | The output shaft and the main drive shaft are connected by stepless adjustment; the mechanical connection is firm and reliable |
| Overload protection | An overload protection device that reliably cuts off the motor power supply shall be installed in the operating mechanism |
| Bearing housing structure | Fully sealed construction without an "oil filling hole" |
| Drive connecting parts | Universal joint bearing (with dust-proof structure) + self-lubricating bushings; pins made of anti-rust material |
| Drive linkage | Fabricated connecting structure meeting the requirements for mechanical strength, rigidity and corrosion resistance |
| Water accumulation protection | No water accumulation shall occur on any component or on the enclosure (especially at drive connections and moving parts) |
Structural Features
- Manual operation with compact structure
- Connects to the main shaft of the disconnector for easy installation
- Clear indication when fully opened or fully closed
- Fully sealed drive structure, suitable for outdoor environments
- Interchangeable, easy to maintain and replace
Scope of Application
Suitable for manual opening and closing operation of disconnectors on electrified railway overhead contact systems.
Note: Parameters such as the installation dimensions and the operating torque are subject to the product manual.
Previous: Manual Crank Operating Mechanism
Next: 没有了！